Bosch e-bike error codes identify faults in the display, drive unit, battery, wiring, or other components. Their meanings depend on the Bosch system and model year. The three-digit codes below come from Bosch’s Kiox BUI330 owner’s manual; they may not match a newer Bosch Smart System bike.

Bosch eBike System 2 Error Codes
| Code | Meaning | Recommended action |
|---|---|---|
| 410 | A button on the on-board computer is jammed. | Check for dirt or debris and clean the button. |
| 414 | Operating unit connection problem. | Have the connections checked. |
| 418 | A button on the operating unit is jammed. | Check for dirt or debris and clean the button. |
| 419, 531, 593 | Configuration error. | Restart the system. Contact a Bosch dealer if the code remains. |
| 422 | Drive unit connection problem. | Have the connections checked. |
| 423 | Battery connection problem. | Have the connections checked. |
| 424 | Communication error between components. | Have the connections checked. |
| 426 | Internal timeout error. | Restart the system. If it continues, contact a Bosch dealer. |
| 430 | The on-board computer’s internal battery is drained. | Charge the computer in its holder or through its USB port. |
| 431, 450, 580, 656 | Software version error. | Restart for 431 or 450. For 656, ask a Bosch dealer to update the software. |
| 440, 500, 511 | Internal fault in the drive unit. | Restart the system. Contact a Bosch dealer if it continues. |
| 460 | USB port fault. | Disconnect the cable from the computer’s USB port. Contact a Bosch dealer if the code remains. |
| 490 | Internal fault in the on-board computer. | Have the computer checked. |
| 502 | Bike light fault. | Check the light and its wiring, then restart the system. |
| 503 | Speed sensor fault. | Restart the system. Contact a Bosch dealer if it continues. |
| 510 | Internal sensor fault. | Restart the system. Contact a Bosch dealer if it continues. |
| 530, 655 | Battery fault or multiple battery faults. | Switch off the e-bike, remove and reinstall the battery, then restart. Contact a Bosch dealer if the code remains. |
| 540 | Drive unit temperature is outside its permitted range. | Switch off the system and let the drive unit cool down or warm up, then restart. |
| 550 | An unauthorized electrical consumer was detected. | Remove the consumer and restart the system. |
| 591 | Authentication error. | Switch off the system, remove and reinstall the battery, then restart. |
| 592 | Incompatible components. | Use a compatible display; contact a Bosch dealer if needed. |
| 595, 596 | Communication error involving the gearbox. | Have the gearbox wiring checked, then restart. |
| 602 | Internal battery fault, either during charging or in normal operation. | During charging, disconnect the charger, restart the system, then reconnect it. Otherwise, restart the system. Contact a Bosch dealer if it persists. |
| 603, 640 | Internal battery fault. | Restart the system. Contact a Bosch dealer if it continues. |
| 605 | Battery temperature error. | If riding, switch off the system and let the battery return to a tolerable temperature. If charging, disconnect the charger and let the battery cool. |
| 606 | External battery fault. | Check the wiring and restart the system. Contact a Bosch dealer if it persists. |
| 610 | Battery voltage fault. | Restart the system. Contact a Bosch dealer if it continues. |
| 620 | Charger fault. | Replace the charger and contact a Bosch dealer. |
| 7xx | Gearbox fault. | Consult the gearbox manufacturer’s instructions. |
| 800, 840, 850, 889 | Internal ABS fault. | Contact a Bosch dealer. |
| 810 | Implausible wheel speed sensor signals. | Contact a Bosch dealer. |
| 820, 830 | Fault in the line to the front or rear wheel speed sensor. | Contact a Bosch dealer. |
| 821–826, 833–835 | Front wheel speed sensor signals are implausible; the sensor disc may be missing, faulty, or incorrectly mounted. | Restart and take a test ride as directed in the manual. Contact a Bosch dealer if the warning remains. |
| 831 | Implausible rear wheel speed sensor signals. | Restart and take a test ride. Contact a Bosch dealer if the warning remains. |
| 860, 861 | Power supply fault. | Restart the system. Contact a Bosch dealer if it continues. |
| 870, 871, 880, 883–885 | Communication error. | Restart the system. Contact a Bosch dealer if it continues. |
| 890 | ABS indicator fault or missing indicator; ABS may not be functioning. | Contact a Bosch dealer. |
The table summarizes Bosch’s published troubleshooting guidance. Some codes have slightly different remedies depending on the situation—for example, code 602 differs when it appears during charging. Bosch advises having repairs performed by a certified bicycle dealer.
Bosch Smart System Error Codes
Bosch Smart System bikes may display longer codes containing letters as well as numbers. For example, 51000C indicates that the torque sensor is not working properly; Bosch recommends restarting the e-bike and contacting a specialist dealer if the error persists. 504 indicates a distorted speed signal; Bosch recommends checking the spoke magnet’s position and checking for tampering.
For a Smart System bike, check the eBike Flow app or scan the error code’s QR code to open Bosch’s matching help page. Bosch’s Help Center provides code-specific descriptions and troubleshooting steps, so use it when the code on your bike does not appear in the older three-digit list above.
What to Do When a Bosch Error Appears
- Stop safely and note the full code, including any letters.
- Restart the e-bike if Bosch’s instructions recommend it.
- Follow the code-specific steps for visible checks, such as cleaning a stuck button or checking the spoke magnet.
- Contact a Bosch specialist dealer if the error returns, the motor assistance stops, or the instructions call for a dealer inspection.
The three-digit list is based on Bosch’s Kiox BUI330 manual. Your bike’s own manual and Bosch’s current Help Center should take priority if they give different instructions.