When It comes to the E-bikes, most of them have multiple gears that allow and enable the rider to adjust the pedaling process and the pedaling effort according to the needs of the terrain. That is why the gears here play an essential role, especially for mountain bikes. Climbing on steep and uneven terrain is much easier done when the gears are shifted. It is the same between the traditional and the E-bikes. The gears in both types of bicycles are pretty much the same. However, there are few details that make the two differ.Not only will the proper shifting gears on the bicycle make the riding easier and more enjoyable, but it will also save on the battery, which is another very important aspect.
Here is everything you need to know on how to properly use the E-bike gears and save on battery.
Don’t Shift Gears While Stationary
Getting the most out of your E-bike starts with the proper use and knowledge of using the gears on the electric bike in the right way. Each electric assistance level has a corresponding mechanical gear. This means that even with minimal electric assistance, there are several different speeds that the rider can use, which suit the needs of the terrain and well as the training level of the cyclist. When in pedaling assist mode, which is also known as cadence, the mechanical gears can be shifted to a harder level. For that change to take the effect, and reflect n the battery, it is important to always keep pedaling when it comes to changing gears. Shifting the gears should never be done when the bike is stationary, only when it is in motion. However, the level of pedal assistance can be changed when the E-bike is stationary.
Himiway D7 (Cobra) | Full Suspension Electric Bike
-
80
Miles
Per Charge (maximum)
-
26x4.5
Super Fat Tire
-
Torque
Sensor
-
Hydraulic
Brakes
Shift to a Low Gear Before you stop
Now that you know how to properly shift the gears when riding, what happens when you decide you want to stop? Well, shifting gears before stopping is also another essential part of the E-bikes. Just as you are preparing to stop, you must remember to start shifting the gears into easier mechanical levels. This should be done while pedaling, as you are slowing down. This is sort of a good practice which will remain and keep the E-bike and the speed in a correct gear, just before stopping. The electric assistance level should be adjusted just before stopping. Another way to do it is also when you have already stopped and the bike is stationary.
Anticipate the terrain
Properly shifting gears and saving the battery has also a lot to do with the terrain. It is not the same battery use when you are riding through a city, and climbing up a hill. It is very well known, and natural too, that uphill trails require increased pedal assistance. For example, if you are into lower assistance settings on your E-bike, it is very likely that you will start and experience a decrease in the speed as you begin climbing up the hill. Shifting gears must be done timely so that your ride is easier. When it comes to the hills, it is especially important to shift to the right gear before you are halfway up. That is because that way, you will need to add and apply maximum pressure on the E-bike pedals. When it comes down to slopes, then, shifting one gear at a time is the right way to manage your E-bike. That comes onto the pedals can be gradually shifted. Downhills and flat terrains also are great for shifting one gear at a time.
Don’t shift too quickly
Shifting gears downhill is always an exhilarating and tempting thing when you want to achieve a higher speed and boost your adrenaline. However, shifting the gears in the E-bike, especially on a flat or downhill terrain must be done gradually, because the chain might disconnect from the gears. That is why shifting one gear at a time is the best way to successfully shift the gears. Let the chain adjust to that particular speed, and then move onto the next gear. Each E-bike has different setups that respond to different shifting gear processes. As soon as you learn how your E-bike and gears work, you will get the most out of your ride and enjoy the gears properly.
As you know, the e-bike today comes with exceptional battery quality, that will get you easily even to the most distant point you want to go. However, managing the gear on your E-bike is an additional property that can save battery, make it last longer. This is especially great when you are exploring new paths and trails and are not sure where you can charge your battery. With the pedal-assist mode, proper shifting, using the right gear at the right moment, riding your E-bike will be most efficient in order to preserve the battery life. Moreover, you will experience colorfulness in the way you ride your E-bike as well as all the performances it provides.
Your E-bike will work the best when you contributing and working efficiently. Choosing to ride slower will save the battery, alongside changing the gears at a suitable speed. With these tips, you will use the full potential of your E-bike and experience the best rides.
