Before turning on the power, we must ensure that the battery is already installed on the bike. The key on the battery is not a power switch. It is to stabilize the battery in the bike. The key can be easily installed or removed from the bike as shown below:
2. Turn on the electric bike
Find the three-button display remote on the left side of the handlebar. Press and hold the power (mode) button for about 2 seconds until the LCD display in the center of the handlebar is activated as the picture shows:
3. Shut down the electric bike
Press and hold the power button on the monitor remote for about 2 seconds until the LCD monitor turns off as the picture shows:
Reminder: Before riding, be sure to check that the battery is firmly locked into the battery installation tray. Before use, the battery must be properly locked in the frame battery holder. Battery installation details can refer to: HIMIWAY Battery Correct Installation and Removal Steps
